Table of Contents
Advertisement
Folding, Stapling & Folding, and Trimming Modes (continued)
4 Touch OK on the Finisher Mode Selection Screen. The Basic Screen will be restored
and the selection made in the output mode will be reflected in the output icon display.
5 Select additional copying features, as required.
NO COVER SHEET of Booklet is automatically selected. To change this selection,
touch APPLICATION to display the Application Selection Screen, then touch Booklet
twice to display the Booklet Mode Selection Screen to make another selection or to
release the setting.
6 Enter the desired print quantity.
7 Position originals in the document feeder. When using Store mode, see p. 6-29 to p.
6-33.
NOTE:
When loading originals, heed the following limits on capacity:
Folding mode / Folding and Trimming mode;
6 pages or less for simplex copying
12 pages or less for duplex copying
Stapling & Folding mode / Stapling & Folding and Trimming mode;
32 pages or less for simplex copying
64 pages or less for duplex copying
Exceeding the above limits on capacity may cause trouble in the finisher.
8 Press [ START ].
NOTE:
CLOSE THE TRIMMER STACKER COVER; otherwise the machine cannot print/copy.
DO NOT OPEN THE TRIMMER STACKER COVER DURING PRINTING/COPYING; otherwise,
the machine will cease operating and a paper misfeed will occur.
CAUTION
When the Booklet tray / Trimmer unit tray capacity is exceeded, the finisher will cease
operating. To avoid such trouble, select an appropriate print quantity from the specifications
on p. 7-12.
Section 7 : Output Modes
7 - 15
7
Output
Modes
Folding/ Stapling &
Folding/ Trimming
Advertisement
Table of Contents
