Table of Contents
Advertisement
Section 7 : Output Modes
Staple-Sort Mode Using Primary (Main) Tray (continued)
Procedure
1 Close the RADF securely, then press [ AUTO RESET ].
2 Touch STAPLE SORT on the Basic Screen to highlight it. The Staple Position icon
will appear in the output icon display.
When not changing the staple position, proceed to step 6.
3 Touch OUTPUT MENU on the Basic Screen to display the Finisher Mode Selection
Screen.
Basic Screen
4 Touch the desired key among the eight keys on the screen to select the staple
position.
7 - 8
Finisher Mode Selection Screen
Advertisement
Table of Contents
