Table of Contents
Advertisement
Check Mode and Proof Copy (continued)
3
Change/Release Settings
If you want to change or release any settings, follow the procedure below.
To change the settings:
1 Touch the desired copying condition key on the Check Screen to highlight it.
Check Screen
NOTES:
• Any key that cannot be highlighted indicates that the copying condition cannot be changed
from the Check Screen.
• The CHANGE SETTING key will not function for the following application functions, however
they can be released by touching RELEASE SETTING key: Non-image area erase, Reverse
image, AUTO layout, All-image area, Overlay.
2 Touch CHANGE SETTING . The LCD will display an appropriate screen to change
the copying condition selected.
• Selecting a basic copying condition key will display the Basic Screen.
• Selecting Enhance Mode, Special Orig., or Original key will display the Special
Original Screen. (See Section 8.)
• Selecting an application function key will display the Change Application Selection
Screen.
When BOOK MARK has been checked on a subsequent screen, selecting the
application function key will jump to that screen. See p. 9-2 for details.
3 Change the setting as desired, then restore the Check Screen to return to the checking
steps, or to the Basic Screen to start copying.
Section 6 : Basic Operations
6
Basic
Operation
Check Mode &
Proof Copy
6 - 39
Advertisement
Table of Contents
