Table of Contents
Advertisement
AUTO Layout
Use this function to detect the image area of the original and centre the whole image on
the copy paper.
Specifications for AUTO Layout
❒ Copy mode is automatically set to 1s1; 1s2 mode is also available only when using
Store mode.
❒ APS and AMS are automatically released. Changing Magnification is available.
❒ Non-image area erase is automatically selected (can be released manually).
❒ Incompatible Basic Copying Conditions: APS, AMS, Rotation Sort, Rotation Group
❒ Incompatible Special Originals: Mixed Original, Z-folded Original, SDF
❒ Incompatible Applications: Sheet/Cover Insertion, Image Insert, Repeat, All-image Area,
Image Shift, Overlay, Storing image in Overlay Memory
NOTE:
The AUTO layout function may not operate properly if the lighting in the work place is directly over
the platen glass. In this case, consult your service centre about an appropriate place for installation.
Place original
Procedure
1
Set Copying Conditions
1 Touch APPLICATION on the Basic Screen to display the Application Selection Screen.
2 Touch AUTO Layout . The incompatible function keys will be dimmed to show inactivity.
3 Make additional application selections, as desired.
Application Selection Screen
Section 9 : Applications
Auto layout
9 - 47
Frame/Fold
Erasure
AUTO Layout
9
9
Applications
Applications
Advertisement
Table of Contents
