Operation; Check Mode And Proof Copy - Konica Minolta 7075 Instruction Manual

Check Mode and Proof Copy

Use the Check mode to confirm copying selections before pressing the [ START ] key. The
Check Screen allows you not only to view the current settings but to change or release
them directly from the Check mode.
In this mode, use Proof copy to produce a sample of the copied set before copying multiple
copies. This is a convenient and cost effective way of viewing the results of the following
copying selections.
• Copying conditions using Store mode
• Sheet/Cover insertion
• Chapter
• Combination
With Proof copy, all originals are scanned into memory, and only one set is output after
you press [ PROOF COPY ] key on the control panel or touch PROOF COPY key on the
Check Screen. After Proof copy, some copying condition keys may appear dimmed in the
Check Screen. As to the copying condition indicated on these dimmed keys, you cannot
change or release the selection.
When [ START ] key is pressed, the job resumes copying until the job is completed.
Specifications for Check Mode and Proof Copy
❒ All settings made can be viewed in the Check Screen.
❒ Incompatible Basic Copying Conditions with Proof Copy: Group
❒ Incompatible Special Originals with Proof Copy: Resolution (Very high)
❒ Incompatible Applications with Proof Copy: None
Procedure
1
Display Check Screen
1 Press [ CHECK ] on the control panel to display the Check Screen.
Control Panel
SCANNER / SERVE
PRINTER
CHECK HELP
JOB MEMORY
AUTO RESET
2 Verify the settings made for the current job.
Check Screen
Section 6 : Basic Operations
• Booklet
• Image insert
• Dual page
• Program job
6 6
Basic Basic

Operation

Operation
Rotation
Check Mode &
Proof Copy
6 - 37