Table of Contents
Advertisement
Section 11 : Server Function
Image Recall Mode (continued)
5 If the password is correct, touch OK to display the Recall Job Selection Screen.
6 Touch the desired job name key to highlight it, then touch a to move it to the recall
list on the right side. Touching JOB CHECK displays the Check Screen to allow you
to view all the feature selections made for that job.
NOTE:
More than one job at a time can be moved to the recall list to be output in succession, provided
that those jobs have been stored in the same copying conditions.
To cancel the job moved to the recall list, touch the job name in the list to highlight it, then touch
b to return it to the left side key.
Recall Job Selection Screen
If the desired job name is displayed in the recall list, touch OK. The Image Data
Recalling Screen will be displayed to show the current status of transmission.
7 When the data transmission is completed, the Basic Screen will be displayed reflecting
the settings made for that job.
Image Data Recalling Screen
NOTE:
To suspend recall, touch CANCEL on the Image Data Recalling Screen, then touch YES on the
popup menu to delete the data recalled to DIMM; or touch NO to continue. The data stored in HDD
will not be erased by this operation.
8 Press [ START ] to print.
11 - 14
Advertisement
Table of Contents
