Section 6 : Basic Operations
Copy Density (continued)
Density Shift (continued)
To set the Photo mode, touch Photo to highlight it, then
press [ P (COUNT) ].
The following message will be displayed.
Density Shift (Photo)
To set the Increase contrast mode, touch Increase Contrast to highlight it, then press
[ P (COUNT) ].
The following message will be displayed.
Density Shift (Increase contrast)
3 Press any key (from 0 - 5) using the keypad to determine the Density shift.
NOTE:
Entering 6 or above will be ignored.
4 Press [ STOP ]. Density shift is determined.
6 - 12
2 (0 ~ 5)
3 (0 ~ 5)