Table of Contents
Advertisement
Tandem Mode (continued)
4
Position Originals ... FACE UP in RADF
Position original(s) FACE UP in the document feeder or FACE DOWN on the platen
glass of the primary copier.
5
Start Tandem Mode Copying
Press [ START ] on the control panel of the primary copier.
The Sub icon will display on the Basic Screen of the secondary copier to indicate that
the two copiers will start working in tandem.
INTERRUPT
PROOF COPY
CLEAR QTY.
START
The tandem mode will be released automatically when the tandem mode copying is
completed, and the Master and Sub icons on each Basic Screen will disappear.
NOTE: Entering reserve job during Tandem mode copying
If scanning of the next reserved job is performed during the tandem mode copying, that job will
also be performed in the tandem mode. Up to 5 jobs including the present job can be reserved.
NOTE: Interrupt mode during Tandem mode copying
Interrupt copying is available only on the copier with [INTERRUPT] pressed. The tandem mode
copying on the copier in interrupt mode will be suspended until the interrupt copying is completed.
If the interrupt mode lasts long, the Allocation recovery mode will function for the other copier to
take over the rest of print quantity.
FACE DOWN on Platen Glass
Basic Screen
(with Sub icon displayed)
TIM
POWER
ON /
STOP
Section 7 : Output Modes
7 - 35
7
Output
Modes
Tandem Mode
Advertisement
Table of Contents
