Table of Contents
Advertisement
Interrupt Mode
Use the Interrupt mode to interrupt copying in progress to perform a simple job. When
interrupt copying is completed, the settings for the initial job restore automatically and the
Basic Screen displays. Press the [ INTERRUPT ] key when the copier is in the following
conditions:
• Printing continuously the image stored using Store mode
• Scanning the originals using Store mode
• Scanning the originals using Store mode while printing in Reserve mode
If desired, key operator can change the timing to stop current machine operation for
interrupt copying. Note that the compatible copying conditions vary according to the timing
selected. See p. 12-39 to p. 12-43.
Specifications for Interrupt Mode
❒ Incompatible Basic copying conditions: Reserve
❒ Incompatible Special Originals: None
❒ Incompatible Applications: Storing image in Overlay memory
Procedure
1
Press INTERRUPT Button
To stop the current copying job, press [ INTERRUPT ]. For
particular jobs in progress, copying will cease only after
certain phases of the immediate operation are completed,
as indicated by LED conditions described below.
• Collectively printing image stored in memory
The [ INTERRUPT ] LED blinks until one set of the current
job is printed. Then the LED remains steady for the
temporary job performed in Interrupt mode.
• Scanning originals into memory
The [ INTERRUPT ] LED blinks until scanning is completed
for all originals placed in the document feeder. Then, the
LED remains steady for the temporary job performed in
Interrupt mode.
• Scanning originals into memory while printing in Reserve mode
The [ INTERRUPT ] LED blinks until the copier completes the current printing job,
scans all originals placed on the document feeder, and prints one set of the Reserved
job. The LED remains steady for the temporary job performed in Interrupt mode.
All JOB indicators on the Basic Screen will change to INTERRUPT .
Basic Screen
Section 6 : Basic Operations
INTERRUPT
PROOF COPY
STOP
CLEAR QTY.
START
6
6
Basic
Basic
Operation
Operation
TIM
POWER
ON /
Check Mode &
Proof Copy
Interrupt Mode
6 - 41
Advertisement
Table of Contents
