Table of Contents
Advertisement
System Initial Setting [1]
Set the following initial conditions of the copier.
• Date & Time setting: Current date and time, summer time
• Language select setting: Language used in LCD (English)
• IP address setting: IP address to be accessed from PC
Date & Time Setting [1]
Set the current date and time, and also the summer time.
❒ Default setting: Summer time off
System Initial Setting Menu Screen
Procedure
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter a 4-digit key operator password, then touch OK to display the Key Operator
Mode Screen.
NOTE:
If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 Touch [1] System initial setting to display the System Initial Setting Menu Screen,
then touch [1] Date & Time setting to display the Date & Time Setting Screen.
3 Adjust the time.
The time that the copier currently has is displayed in the upper line, in the order of
date, month, year, and time (in 24-hour expression). In the lower line, the highlighted
section can be changed by using keypad on the screen.
Touch SET to move the highlighted section to the number to be changed.
4 To activate the summer time function, touch Summer time to highlight it. The Present
time will gain an hour.
5 Touch OK to update the Present time by the Setting time and return to the System
Initial Setting Menu Screen.
6 If no further changes are required, proceed to step 8.
7 If other system initial settings are required, touch desired key.
8 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen.
9 Touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations.
Section 12 : Key Operator Mode
Date & Time Setting Screen
Function
Menu Map
System Initial
Setting
12
12
Key Operator
Key Operator
Mode
Mode
12 - 7
Advertisement
Table of Contents
