Table of Contents
Advertisement
Section 9 : Applications
All-Image Area (continued)
2
Enter Print Quantity
Enter the desired print quantity, using keypad.
To change the print quantity, press [ C (CLEAR QTY.) ] and enter the correct quantity.
3
Position Originals ... FACE UP in RADF
Position original(s) FACE UP in the document feeder or FACE DOWN on the platen
glass.
HINTS:
• For details on positioning originals, see p. 4-2 and p. 4-4.
• For original and copy paper information, see Section 4.
4
Start Copying
Press [ START ] to scan.
Printing job starts in succession when the machine
becomes ready for output.
To suspend the scanning or printing job, press [ STOP ].
After copying is completed, all the scanned data will be
deleted automatically.
Press [ AUTO RESET ] to release the mode and reset the
machine.
CAUTION
When the finisher / paper exit tray capacity is exceeded due to the print quantity selected,
remove the copied sets as they exit; otherwise, mishandled paper will occur.
9 - 50
FACE DOWN on Platen Glass
INTERRUPT
PROOF COPY
STOP
CLEAR QTY.
START
TIM
POWER
ON /
Advertisement
Table of Contents
