High End Systems Cyberlight User Manual page 98

Channel Assignment
Channel 9 Static litho
Channel 10 Rotating Litho
Select the litho to rotate
forward/reverse with this
channel. Then use Channel
11 to set the rotation speed.
For rotating litho position
parameters select the litho
position to index with this
channel. Then use Channel
11 to set the rotational
position (index value) from 0
to 360 degrees.
Channel 11 Rotate
(use with Channel 10)
Channel 12 Zoom
Channel 13 Focus
Channel 14 Iris
Table A-2 : Cyberlight DMX Assignments Mode 1
Range
Full
0
Full
0
Construct Parameter
Litho 1 (open)
Litho 2
Litho 3
Litho 4
Litho 5
Litho 6
Litho 7
Litho 8
Forward spin speed 8
Forward spin speed 7
Forward spin speed 6
Forward spin speed 5
Forward spin speed 4
Forward spin speed 3
Forward spin speed 2
Forward spin speed 1
Reverse spin speed 1
Reverse spin speed 2
Reverse spin speed 3
Reverse spin speed 4
Reverse spin speed 5
Reverse spin speed 6
Reverse spin speed 7
Reverse spin speed 8
Litho 1 (open)
Position 3 (open)
Reverse rotate 5
Reverse rotate 4
Reverse rotate 2
Reverse rotate 1
Forward rotate 5
Forward rotate 4
Forward rotate 2
Forward rotate 1
Position 5
Position 4
Position 3 (open)
Position 2
Position 1
Position 3 (open)
For Rotating Litho rotate mode use Ch 11 to set
rotate speed
For Rotating Litho position mode use Ch 11 to set
the index from 0 to 360 degrees
Zoom in/out
Focus in/out
Iris open/close
Appendix A DMX Control of Cyberlight
A
A-5