Figure 3-15. Location Of The First Four Rear Panel Screws You Need To Remove In Order To Access The Lamp Assembly; Figure 3-16. In Order To Remove The Lamp Box Access Door, You Need To; Remove The Last Two 5/32 Inch Allen Screws, Which Are Located By The Color Mixing And Dim Flags - High End Systems Cyberlight User Manual

6.
7.
3-12 Cyberlight User Manual
Figure 3-15. Location of the first four rear panel screws you need to remove in order
to access the lamp assembly.
Remove the last two 5/32 inch allen head screws from the color mixing plate as shown in
Figure 3-16. Carefully lift the lamp box access door from the fixture.
Remove these two 5/32 inch allen screws
Figure 3-16. In order to remove the lamp box access door, you need to remove the
last two 5/32 inch allen screws, which are located by the color mixing and dim flags.
CL and CX models only: As you lift the assembly, disconnect the two fan power connectors
(black and red wires) from the power supply board as shown in Figure 3-17. Set the lamp box
access door aside.
Color mixing plate