Figure 1-21. Setting The Cyberlight Power Switch To The On And Off Positions; Setting The Cyberlight Power Switch - High End Systems Cyberlight User Manual

Setting the Cyberlight Power Switch

It is very important that you turn the Cyberlight power switch OFF before performing certain
procedures. Figure 1-21 shows the power switch in its ON and OFF positions:

Figure 1-21. Setting the Cyberlight power switch to the ON and OFF positions.

Warnings (1) This equipment for connection to branch circuit having a maximum
overload protection of 20 A.
(2) Class I Equipment—This fixture employs a grounded type receptacle
and is not intended for connection to a two wire, ungrounded source of
supply.
Chapter 1 Installation and Setup 1-29
1