High End Systems SHOWGUN 2.5 Getting Started

Getting Started with SHOWGUN™ 2.5
Use the following steps to set up and configure your SHOWGUN™ 2.5 fixture:
Unpack
Unpack your SHOWGUN™ 2.5 fixture and verify that it arrived undamaged. If the fixture is
damaged, notify both the shipping agent and your sales agent immediately.
Install Attachment Plugs
Install the correct power cord cap for your location.
colored according to the following code:
• green and yellow = earth
• blue = neutral
• brown = live
Class 1 equipment - This equipment must be earthed .
Mount
To mount the fixture upright, place the fixture on a sturdy, stable non-flammable surface
that will support a weight of 63.5 kg (140 lb).
Truss mount the SHOWGUN 2.5 fixture using it's custom mounting bracket and clamps and a
safety cable attached to the fixture's base.
WARNING!
SHOWGUN 2.5 projects a powerful light beam that can generate intense heat.
Do not point directly at other lights on the rig.
Do not mount on or within 5 M of flammable objects.
Caution!
SHOWGUN 2.5 fixtures should be installed and operated by trained personnel
only.
The cores in the mains lead are