Where To Go From Here - High End Systems Cyberlight User Manual

Where to Go From Here

The following topics are covered in the remainder of this manual:
•
•
•
•
•
•
•
•
•
1-30 Cyberlight User Manual
Chapter 2: Using your Cyberlight. Covers the differences between DMX 512 and LWR
control protocols; implementing LWR protocol; linking fixtures to the controller; mounting the
fixture; and troubleshooting suggestions.
Chapter 3: Servicing your Cyberlight. Shows how to perform routine cleaning on mirrors,
motors and lenses; replacing power supply fuses; replacing dichroics or lithos; adjusting the
CX mechanical zoom lens; adjusting the mirror head deviation; and adjusting the yoke
deviation.
Appendix A: DMX control of Cyberlight. Explains the three DMX modes and how to use
them. Also shows the relationship between the Cyberlight fixture number and the DMX
address range it uses.
Appendix B: Cyberlight mirror movement times. A table that correlates speed numbers to
mirror movement times, in units of seconds.
Appendix C: Factory-installed wheels. Shows the factory-installed options for the effects
wheel, color wheel, static litho wheel and rotating litho wheel for all three Cyberlight models.
Appendix D: Typical voltages worldwide. A table of typical voltage/frequency settings from
around the world, based on High End Systems' experience.
Appendix E: Important safety information. Multi-lingual warnings you must observe
whenever operating the Cyberlight fixture.
Glossary
Index