Figure 1-20. The Cyberlight Rear Panel Leds Give You Information About; Table 1-2: Cyberlight Information Mode; Locating The Information Led; Switches 3, 4, And 5: Information Mode - High End Systems Cyberlight User Manual

Locating the Information LED

Before describing the remainder of the Cyberlight switches, you need to know the location of the
information LED on the rear panel of the fixture. Figure 1-20 shows the location of this LED:

Switches 3, 4, and 5: Information Mode

Personality switches 3, 4, and 5 control what the "info" LED displays. For example, setting
switches 3, 4, and 5 all OFF causes the "info" LED to display the number of hours the lamp has
been on. The other information controlled by personality switches 3, 4, and 5 is shown in Table 1-
2:
A detailed description of the information displayed in Table 1-2 is shown below:
Lamp Hours [off-off-off] – The total number of hours the lamp has been on since the counter was
reset.
Lamp Strikes [off-off-on] – The total number of lamp strikes.
Lamp Voltage [off-on-off] – The lamp voltage value at the moment of this sample.
Lamp Current [off-on-off] – The lamp current value at the moment of this sample.
Fixture Voltage [on-off-off] – The fixture voltage value at the moment of this sample.
Fixture Temperature [on-off-on] – The fixture temperature (in °C) at the moment of this sample.
Reserved [on-on-off] – These switches are reserved for future expansion.
Version number [on-on-on] – The fixture's software version number.
1-24 Cyberlight User Manual
Figure 1-20. The Cyberlight rear panel LEDs give you information about the
Cyberlight fixture's lamp, fixture voltage, operating temperature, data transmission
and reception, and other factors.

Table 1-2: Cyberlight Information Mode

Set Switches
3 4
Off Off Off
Off Off On
Off On Off
Off On On
On Off Off
On Off On
On On Off
On On On
To Read this Information
5
Lamp Hours
Lamp Strikes
Lamp Voltage
Lamp Current
Fixture Voltage
Fixture Temperature
Reserved
Fixture Version Number