Figure 3-28. Make Sure The End Of The Spring Fits Under Any One Of The Three Retaining Washers, As Shown Above; Figure 3-29. Do Not Place The End Of The Spring Between The Three Retaining Washers - High End Systems Cyberlight User Manual

shaded in the figure.)
Side view of
rotating litho
housing
Front view of
rotating litho
housing
Figure 3-28. Make sure the end of the spring fits under any one of the three retaining
washers, as shown above.
Caution Do not place the end of the spring anywhere else in the rotating litho
wheel housing, as shown in Figure 3-29. Doing so could cause the spring
to unwind and/or cause it to come into contact with other objects inside
the fixture, possibly resulting in damage to the fixture.

Figure 3-29. Do not place the end of the spring between the three retaining washers.

Incorrect placement
Fit the end of the
spring under the washer
Chapter 3 Servicing Your Cyberlight 3-21
3