Rear Panel Led Indicators; Table 1-3: Description Of Cyberlight Rear Panel Leds - High End Systems Cyberlight User Manual

Rear Panel LED Indicators

Table 1-3 lists the meanings of the information and status LEDs located on Cyberlight fixture's rear
panel. Refer back to Figure 1-1 earlier in this chapter for the location of the rear panel LEDs.

Table 1-3: Description of Cyberlight Rear Panel LEDs

LED Name
info
motor
lamp
fan
xmit
recv
If you believe that the LEDs are indicating a problem situation, or if you are experiencing problems
with your fixture, see the section titled "Troubleshooting" on page 2-12.
LED Color
red (blinks) Provides fixture status information. See
"Switches 3, 4, and 5: Information Mode" on
page 1-24.
green Normal.
off Check power supply board fuses as shown in
"Replacing Power Supply Fuses" on page
3-15.
steady Normal.
yellow
flashing
Lamp failed to strike. See "Troubleshooting"
yellow on page 2-12.
(1 flash/
sec)
rapid Over-temp condition. See "Troubleshooting"
flashing on page 2-12.
off Timed out from loss of data.
red Normal.
off Fans have automatically shut off.
yellow The fixture is transmitting data back to a
controller.
off No data is being transmitted.
green The fixture is receiving data from a controller.
off No data is being received.
Description
Chapter 1 Installation and Setup 1-27
1