Figure 3-25. Removing The Center Access Door; Removing And Installing Rotating Lithos; Removing A Litho From The Rotating Litho Wheel - High End Systems Cyberlight User Manual

Removing and Installing Rotating Lithos

This section explains how to remove and replace LithoPatterns lithos.
Please heed the following precautions when handling and using lithos:
• Avoid touching the coated side of the glass. Handle the edge or uncoated side
of the glass when removing or installing lithos. If possible, wear cloth gloves
when inserting and removing lithos from the litho wheel housing.
• If necessary, clean the lithos with a mild glass cleaner and a soft cloth.

Removing a Litho from the Rotating Litho Wheel

1. Remove the fixture's center access door as shown in Figure 3-25.

Figure 3-25. Removing the center access door.

2. Rotate the wheel until the desired litho is in a position for easy access.
3. Keep the rotating litho holder in place with one hand and grasp the spring tab with the other
hand. Turn the spring; as you do so pull it away from each retainer washer. Continue pulling
and turning the spring until it is loose enough to lift out of the housing.
4. Carefully remove the litho from the housing.
Chapter 3 Servicing Your Cyberlight 3-19
3