High End Systems Cyberlight User Manual page 128

Appendix E
Important Safety Information
WARNING: For Continued Protection Against Fire
1. This equipment is designed for use with Philips type MSR1200 or MSD1200, 1200
watt lamp only. Use of any other type lamp may be hazardous and will void the
warranty.
2. Do not mount on a flammable surface.
3. Maintain minimum distance of 1.0 meter (3.28 feet) from combustible materials.
4. Replace fuses only with the specified type and rating.
5. Observe minimum distance to lighted objects of 1.0 meter (3.28 feet).
6. This equipment for connection to branch circuit having a maximum overload
protection of 20 A.
WARNING: For Continued Protection Against Electric Shock
1. If this equipment was received without a line cord plug, attach the appropriate line
cord plug according to the following code:
• Brown–live
• Blue–neutral
• Green/yellow–earth
2. As the colours of the cores in the mains lead of this equipment may not correspond
with the coloured markings identifying the terminals in your plug, proceed as follows:
- the core which is coloured green and yellow must be connected to the terminal in the
plug which is marked with the letter "E" or by the earth symbol
green and yellow.
- the core which is coloured blue must be connected to the terminal which is marked with
the letter N or coloured black.
- the core which is coloured brown must be connected to the terminal which is marked
with the letter L or coloured red.
3. This equipment must be earthed.
4. Disconnect power before re-lamping or servicing.
, or coloured green or
Appendix E Important Safety Information
E
E-1