Figure 3-22. In Order To Remove The Lamp Box Access Door, You Need To; Remove The Last Two 5/32 Inch Allen Screws, Which Are Located By The Color Mixing And Dim Flags; Figure 3-23. On Cl And Cx Models, Make Sure You Disconnect The Fan Power Wires From The Fan Connectors Before Removing The Lamp Box Access Door - High End Systems Cyberlight User Manual

• Remove the last two 5/32 inch allen head screws from the color mixing plate as shown in
Figure 3-22. Carefully lift the lamp box access door from the fixture.
Remove these two 5/32 inch allen screws
Figure 3-22. In order to remove the lamp box access door, you need to remove the
last two 5/32 inch allen screws, which are located by the color mixing and dim flags.
4. CL and CX models only: As you lift the assembly, disconnect the two fan wiring harness
connectors (black and red wires) from the power supply board as shown in Figure 3-23. Set
the lamp box access door aside. You now have access to the power supply board.
Figure 3-23. On CL and CX models, make sure you disconnect the fan power wires
from the fan connectors before removing the lamp box access door.
Color mixing plate
Chapter 3 Servicing Your Cyberlight 3-17
3