Figure 2-5. Attaching Two C-Clamps To The Cyberlight Yoke; Figure 2-6. Always Use Suitable Safety Cables When Hanging A Cyberlight; Twice; Loop It Twice If This Will Help Prevent The Fixture From Rotating, Thus Possibly Loosening The Clamp Mounting Bolt - High End Systems Cyberlight User Manual

Figure 2-5. Attaching two C-clamps to the Cyberlight yoke.

4. Tighten the clamps firmly to the Cyberlight yoke and to the support.
5. Loop one or more suitable safety cables around the support and around the top of the
Cyberlight yoke, as shown in Figure 2-6.
Figure 2-6. Always use suitable safety cables when hanging a Cyberlight from a
truss or any other support system. The safety cable can be looped around the
support and the Cyberlight yoke once or twice; loop it twice if this will help prevent the
fixture from rotating, thus possibly loosening the clamp mounting bolt.
Chapter 2 Using Your Cyberlight 2-11
2