Figure 3-4. Close The Iris By Rotating The Large Black Gear Located On Top Of The Iris Motor; Figure 3-5. Cleaning The Anti-Reflective Glass - High End Systems Cyberlight User Manual

4.
5.
Caution
6.
Cyberlight User Manual
3-6
Manually close the iris by turning the large black-colored gear shown in Figure 3-4:
Figure 3-4. Close the iris by rotating the large black gear located on top of the iris
motor.
Gently wipe away excess dust and dirt from the iris using a soft lint-free cloth. You can access
one side of the iris through the open position on the rotating litho wheel; you can access the
other side through the open position on the effects wheel.
Be careful when cleaning the iris. It is made of a very thin, delicate metal
that can be easily damaged.
Clean both sides of the anti-reflective glass (shown in Figure 3-5) with a soft, lint-free cotton
cloth and mild glass cleaning solution.
.S.A. U XAS TE STIN, AU t h g li er b cy
RCH ESEA R E TWAV IGH L O TH L I
R

Figure 3-5. Cleaning the anti-reflective glass.

Anti-reflective glass