Figure 3-1. Bottom View Of The Cyberlight Fixture; Cleaning The Internal Components; Removing The Center Access Door; Cleaning The Mirror, Lenses, Motors And Iris - High End Systems Cyberlight User Manual

Cleaning the Internal Components

You will need:

Removing the Center Access Door

With the fixture bottom-side up, remove the center access door by sliding the two door thumb
latches inward. Lift the door straight up, unhook the safety chain, and set it aside.
Figure 3-1 . Bottom view of the Cyberlight fixture.

Cleaning the Mirror, Lenses, Motors and Iris

1.
Note
2.
Cyberlight User Manual
3-4
- a soft, lint-free cotton cloth
- mild glass cleaning solution
- warm soapy water
Using a soft, lint-free cotton cloth, remove dirt and dust from the motors, mirror, power lens,
focus lens, and zoom lens. If necessary to remove built-up dirt and dust, clean the lenses with
a mild glass cleaner and a soft lint-free cotton cloth.
The Cyberlight CX has no color mixing flags, motorized zoom lens, or frost flags. It does
have a three-position mechanical zoom lens.
Clean the mirror with a cloth soaked in warm, soapy water (see Figure 3-2 for the location of
the mirror).