Figure C-1. Factory Configuration Of The Cx Static Litho Wheel - High End Systems Cyberlight User Manual

Appendix C
Factory-Installed Wheels
This appendix shows how the static litho, rotating litho, color and effects wheels are configured by the factory
when Cyberlight is shipped. The numbers shown around the outside of the wheels are the position numbers used
by a controller to select that effect. For example, choosing position 5 on the CX static litho wheel (shown in
Figure C-1 below) with a controller selects the "tunnel" litho.
CX static litho wheel:

Figure C-1. Factory configuration of the CX static litho wheel.

Litho names:
1 open 5
2 beveled star 6
3 indigo spin 7
4 groovy 8
tunnel
indigo dots
netwerk
sharp burst
Appendix C Factory-Installed Wheels
C
C-1