High End Systems Cyberlight User Manual page 129

5. Equipment suitable for dry locations only. Do not expose this equipment to rain or
moisture.
6. Refer servicing to qualified personnel; no user serviceable parts inside.
7. Class I equipment - this fixture employs a grounded type receptacle and is not
intended for connection to a two wire, ungrounded source of supply.
WARNING: For Continued Protection Against Exposure To Excessive Ultraviolet (UV)
Radiation
1. Do not operate this equipment without complete lamp enclosure in place or if shields,
lenses, or ultraviolet screens are damaged.
2. Change shields, lenses, or ultraviolet screens if they have become visibly damaged to
such an extent that their effectiveness is impaired, for example by cracks or deep
scratches.
3. Never look directly at the lamp while lamp is on.
WARNING: For Continued Protection Against Injury To Persons
1. Use secondary safety cable when mounting this fixture.
2. CAUTION: Hot lamp may be an explosion hazard. Do not open for 5 minutes after
switching off. wear eye and hand protection when re-lamping.
3. Equipment surfaces may reach temperatures up to 62° C (144° F). Allow 10 minutes
for cooling before handling.
4. Change the lamp if it becomes damaged or thermally deformed.
E-2 Cyberlight User Manual