Interpreting The Information Led - High End Systems Cyberlight User Manual

Interpreting the Information LED

The "info" LED on the Cyberlight fixture's rear panel indicates numerical values by blinking.
Individual digits in a number are separated by a short pause. Iterations of the same number are
1
separated by a long pause.
The value that the info LED represents is determined by personality switches 3 through 5. Once
you set the switches as shown in Table 1-2 on page 1-24, the same value is repeated until you
change the switch settings.
Example #1: The number 3 would appear as shown below:
Example #2: The number 230 would appear as shown below:
Chapter 1 Installation and Setup 1-25