Figure 3-33. Grasp Both Sides Of The Mirror Head And Rotate It To The; Figure 3-34. Be Sure To Note The Deviation Angle In Case You Need To Set; This Exact Deviation Again. For Example, The Figure Above Has About A 10° + (Plus) Deviation - High End Systems Cyberlight User Manual

Figure 3-33. Grasp both sides of the mirror head and rotate it to the desired position.
3. Note the "Deviation" angle (see Figure 3-34) you are using, in case you wish to use the same
deviation in other venues.
Figure 3-34. Be sure to note the deviation angle in case you need to set other
fixtures for the same deviation, or if you want to use this exact deviation again. For
example, the figure above has about a 10° + (plus) deviation.
4. When you are finished, retighten the three 5/32 inch allen screws and the T-handle so the
mirror head is securely in position.
Chapter 3 Servicing Your Cyberlight 3-25
3