Chapter 2: Installation And Setup; Installation Includes Mounting, Connecting To Power And Establishing; Unpacking The Cyberlight® 2.0 Fixture; Installing The Power Cord Cap - High End Systems Cyberlight 2.0 User Manual

Table of Contents

Chapter 2:

Installation and Setup

Installation includes mounting, connecting to power and establishing Ethernet

and DMX links. Setting a start channel configures the fixture for DMX control.

Unpacking the Cyberlight

Carefully unpack your fixture and verify that it arrived complete and without any damage. If any

internal or external parts of the fixture are damaged you must notify both the shipping agent

and your sales agent immediately.

Do not discard the shipping carton and packing materials. The carton and packing materials

are specifically designed to protect the product during transport. High End Systems assumes no

responsibility for products damaged during transport. Any product being returned for repair

must be shipped in its original shipping carton and packing materials.

Note: Before sending anything to the factory, be sure to call your HES

dealer/distributor for a Return Authorization (RA) number. The factory

cannot accept any goods shipped without an RA number.

You must obtain and install a power cord cap before you can connect the Cyberlight 2.0 to a

power outlet. The type of power cord cap you must obtain depends on the location in which the

Cyberlight 2.0 will be used; different locations (even within the same country) might have

different power cord cap requirements.

Note: Because of the wide variety of power cord caps used worldwide, High

End Systems cannot make specific recommendations for the

particular power cord cap you should use. Contact a local authority if

you are unsure which type of power cord cap you need.

The cores in the mains lead are colored in accordance with the following code:

• green and yellow: earth

• blue: neutral

• brown: live

Since the colors of the cores in the mains lead of this equipment may not correspond with the

colored markings identifying the terminals in your plug, proceed as follows:

Cyberlight

2.0 User Manual

2.0 Fixture

CHAPTER 2

Installation and Setup

Table of Contents