Printer Behaviour - Oce CS 5090 User Manual

If your computer is on a network, log on and print from several software
8
applications.
If steps 7 or 8 fails, try again from another computer, or remove it from the
9
network to test on a stand-alone basis.
If one application fails, but others print successfully, the problem can
I
originate from a specific software.
If all applications fail to print, call Océ Service.
I

Printer behaviour

Printer does not turn on
Check that the power cord is securely attached to the printer and plugged into
I
a working electrical outlet.
Check that the power switch is on.
I
Display does not light up
Check that the power cord is plugged in and the power switch is on.
I
Push any control panel button. The display should light up.
I
File will not print
Check the electrical connections.
I
Takeup roll does not turn
Check that the paper feed option is set to "Takeup".
I
Takeup roll does not stop turning
Check that nothing blocks the take-up sensor (between the take-up sensor
I
and media).
Automatic cutter does not work or tears the paper
Make sure the Auto-Cut option is set to ON.
I
Make sure Media Supply Type is set to Roll.
I
Make sure the cutter is properly installed. (see 'Install cutter' on page 24)
I
126 Océ CS 5090 User Manual