Oce CS 5090 User Manual page 32

2298
[14] Inserting the needle into the small opening of the Prime tool
Close the ink delivery lines by pushing the valve up and remove the cartridge
8
needle from the Océ Prime Tool.
Insert the needle into the cartridge opening and tighten clockwise securely.
9
[15] Removing the cartridge needle
Tighten the fitting (about 1/4 turn) to prevent air leaks.
10
Push the valve down to open the delivery lines.
11
The ink in the tubing-line will travel back up into the lines and not be
Note:
visible in the tubing-line assembly. This is normal and expected. When
printing, the cartridges will draw back the ink through the lines in the
cartridges.
Remove the cartridge from the carriage and remove blue tape from the
12
cartridge jet plate.
32 Océ CS 5090 User Manual