Operate the CS 5090
Before printing, make sure that you are familiar with the start-up checklist and
the main menu functions of the control panel.
Start up checklist
To start the CS 5090, check the following:
The power cord is plugged into the electrical outlet.
I
The printer connects to your computer using a parallel cable.
I
Turn on the printer before attempting to print. When you switch on the
I
printer, carriage moves to the left and checks if there is media loaded. If it is
the case, media size is automatically determined.
In Roll/Sheet mode, the leading edge of the media is detected.
Note:
Locate the control panel
You can locate the control panel on the right-hand side of the printer. It
includes seven buttons and a display indicating modes and settings, as
illustrated below. For a complete summary of all printer options, see 'Main
menu at a glance' on page 46.
[2] Océ CS 5090 control panel
16
Océ CS 5090 User Manual
! ! ! ! Click for Video
Load Media
Cut
Pause
Reset
2271
Feed Media Menu
Set Up Menu
Utility Menu