Rotate A Print; Make Reprints - Oce CS 5090 User Manual

Rotate a print

The printer automatically prints an image with the long side on the paper axis.
To fit multiple images and save media, you can use the 'Rotation' (RO)
function to rotate vector files counter-clockwise 90 degrees at a time.
Only HP-GL/2 files support rotation. RTL files do not support rotation.
Note:
When you use this setting, keep in mind the following principles:
If you specify a rotation that does not fit on the media or contains raster
I
images, the file will not rotate.
When you set the rotation value to 'Auto', the algorithm automatically
I
rotates the print if this will save media, whether or not you have enabled
'Nesting'.
When you set the rotation value to '0', the print does not rotate.
I
'Control' does not override the RO command in the print file.
I
M
To rotate a print
From the main menu, press
1
Choose the rotation angle (0, 90, 180, 270, Auto).
2
Press
3 OK

Make reprints

You can print up to 99 copies of a specific vector file. When you set 'Reprint'
to 0, only one copy prints.
M
To make reprints
From the main menu, press
1
Choose the number of reprints (0 to 99).
2
Press
3 OK
Printing with HP-GL/2
Setup menu
.
Setup menu
.
/
HP-GL/2 menu/Rotation
/
HP-GL/2 menu/Reprints
.
.
63