Select Auto-Cut Delay; Delay Status - Oce CS 5090 User Manual

Select auto-cut delay

Auto-cut delay is the time lapse before the printer automatically performs the
Auto-cut function. It provides additional time for unattended prints to dry. In
addition, you may need to delay auto-cut depending on the media used, the
ambient temperature and the humidity. Auto-cut values range from 0 to 55
seconds in five second intervals and from 1 to 60 minutes in one minute
intervals. Once the delay time has expired, the printer rolls or cuts the image
and begins printing the next image in the buffer. Auto-cut delay is ignored if
Auto-cut is set to 'Off'.
M M M M
To set Auto-cut delay
From the 'Setup menu', 'select Paper Option menu/Auto-cut menu'.
1
Press 'Auto-cut delay'.
2
Choose a time using the 'Next/Prev option' buttons.
3
Press 'OK'.
4

Delay status

Delay status allows users to view the time remaining before Auto-cut and to
cancel the remaining delay time if needed. A countdown timer displays time
left in minutes and seconds. Reset counter forces the count to zero and the
printer initiates the Auto-cut immediately.
M M M M
To reset counter
From the 'Setup menu', 'select Paper Option menu/Auto-cut menu'.
1
Press 'Delay status'.
2
'Select Reset Counter'. 'Auto-cut' is initiated.
3
76 Océ CS 5090 User Manual