Set Auto-Load Delay; Select Auto-Cut - Oce CS 5090 User Manual

Set auto-load delay

Auto-load delay is the time lapse between the moment the printer senses the
presence of the media and when it actually starts feeding the media. This gives
you time to reposition manually the media if necessary. The default is 6
seconds, selectable from a range of 1-12 seconds.
M M M M
To set auto-load delay
Press 'Setup/Paper Option/Auto-load delay'.
1
Choose the delay time.
2
Press 'OK'.
3
Only stored in memory in combination with a user-defined setting.
Note:

Select auto-cut

With the 'Auto-cut' option activated (by default), the printer automatically cuts
the media when printing completes. To ensure that the image is dry before
cutting, turn on the dryer and/or specify a dry time. You can also select to cut
the media manually from the printer control panel at any time.
Auto-cut is disabled when the paper feed option is set to take-up''.
Note:
M M M M
To set auto-cut
Press 'Setup/Paper Option/Auto-Cut menu/Auto-Cut'.
1
Choose 'On' or 'Off'.
2
Press 'OK'.
3
Handling ink and media 75