Oce CS 5090 User Manual page 103

Type 'PRINT /D:LPT1 <filename>.rom:
6
[33] Install firmware
Press 'Enter'.
7
After 20 to 40 seconds, a SINGLE beep from the printer indicates the
installation is successful.
If you hear several beeps or no beep at all, the installation did not
Note:
succeed. If so, check the parallel port connections and repeat steps 4 to 8.
After the single beep, the printer automatically re-initializes.
The printer can be manually re-initialized by selecting 'Setup menu',
Note:
'User Setup menu' and 'Init Settings'.
Once the printer is re-initialized, check the revised version of the firmware (see
8
'Check the firmware version' on page 101).
Firmware downloads 103