Oce CS 5090 User Manual page 188

Clean Trailing Cables
To clean the trailing cables of ink and debris, first remove
power from the printer. Dampen a lint-free towel with water
and wipe the entire surface area of the white trailing ca-
bles.
Caution: Do not pull too hard on the cables or damage may
occur (do not lift from encoder stabilizer bracket or
bend cables).
For extremely dirty cables soapy water may be necessary.
Clean the top surface of the encoder stabilizer bracket and
the lower surface of the rear bracket as shown. This will
prevent friction between the cables and stationary surfac-
es.
Back
Océ CS 5090 User Manual