Place Cartridges - Oce CS 5090 User Manual

Place cartridges

When you place the cartridges, follow closely these precautions:
Do not remove the blue tape from the cartridge until instructed to do so.
I
Do not touch the jet area or the flex contact area of the cartridge.
I
Work with only one colour at a time to avoid contamination.
I
Respect the correct cartridge sequence, especially when using a 1x8
I
configuration (see 'Cartridge sets' on page 27).
Check that the ink delivery lines are not twisted.
I
M M M M
To place a cartridge
With the printer powered on, press
1
one of the cartridges 4, 3, 2, 1) or
C, M, Y, K) to move the carriage into position for cartridge installation or
replacement.
The cartridges are prefilled and preprimed. Remove the cartridge from the
2
sealed bag and remove the shipping cap.
Place it bottom first into the correct slot on the carriage.
3
Do not remove the blue tape from the jet plate.
Note:
Tilt the cartridge up until it clicks into place. Make sure the cartridge is firmly
4
installed.
Getting started
Utility /Access menu/Access Left
(to place one of the cartridges
Access Right
(to place
29