Print Quality - Oce CS 5090 User Manual

Print quality

You can solve most print quality problems by priming, cleaning, replacing, or
calibrating the cartridges. Refer to the following chapters for details:
Priming, calibrating
Cleaning, replacing
No print appears
Check that you've removed the tape from the cartridge printhead.
I
Check that the software (OGSL) is working properly.
I
Check for network problems.
I
White lines or large gaps on print or portions of characters missing
Prime, clean, calibrate, or replace cartridges.
I
Check if the ink reservoir is empty. Refill if necessary.
I
Make sure the media feeds freely.
I
Overall print quality is poor
Prime, clean, calibrate, or replace cartridges.
I
Make sure the printer is positioned on level ground.
I
Cartridge sputters small amounts of ink on paper
Nozzle plate may be flooded. Try using a lower firing rate or replacing the
I
cartridge.
Error handling and troubleshooting
- (see 'Getting started' on page 15)
- (see 'Maintenance and cleaning' on page 105)
131