Printer Specifications - Oce Arizona 318 GL User Manual

Printer Specifications

Printer Specifications
Introduction
The Océ Arizona 318 GL is a flatbed inkjet printers capable of producing large format images on
various rigid and flexible media. The printers consist of a flatbed vacuum table and moving
gantry. Media is held flat and stationary on the vacuum table during printing. The gantry contains
a carriage that sweeps across the table as the gantry moves in steps along the length of the table
to print an image on the media. A Roll Media Option is available to facilitate printing on roll
media.
Printer Specifications
The printer must be operated in accordance with the environmental conditions specified in the
Océ Arizona Series Site Preparation Guide. Also note that there are many safety requirements
and precautions indicated in this document. Be sure to read all of the safety sections before using
your printer.
NOTE
All specifications in this document are subject to change without notice. While due caution has
been exercised in the production of this document possible errors and omissions are
unintentional.
Specifications
Feature
Printing Technology
UV Ink
Maximum Media Size
Media Thickness
Maximum Print Size
Media Weight
Nozzle Drop Volume:
User Interface
Curing System
Power Requirements
Voltage:
(Rated Current: 16A)
BTU Output
Hardware Interface
Image Processing Soft-
ware
14 Chapter 2 - Product Overview
Specification
Piezoelectric inkjet using Océ VariaDot™ technology:
Standard: CMYK or Optional: White.
2.5m (98.4") x 1.25m (49.2")
Maximum: 48mm (1.890")
2.51m (98.8") x 1.26m (49.6")
Maximum: 34 kg/m² (7 lbs/ft²)
Variable droplet sizes from 6 to 42 picolitres
LCD flat-panel monitor and mouse on a user-positioned podium.
UV curing lamps with variable power settings.
208 through 240VAC ±10% 60Hz Single Phase
200 through 240VAC ±10% 50Hz Single Phase
2 AC lines -16A Inlet 1 and 8A Inlet 2
Recommended Circuit Breaker:
North America 20A, European Union 16A.
10,000 BTU (2950 watts) under continuous operation.
USB, Ethernet TCP/IP, 100 base-T (or Gigabyte, if supported by the
local network).
ONYX® PosterShop X10.1 or greater (drivers are included) or
ONYX® ProductionHouse Océ Edition version X10 or greater.