Configuration; Configuration Of The E-Connect Printserver - Oce CS 5090 User Manual

Configuration

M
Configure your computer
On your desktop, right-click 'Network neighborhood'.
1
Select 'Properties' in the popup menu.
2
Click the 'Protocols' tab.
3
Double-click the TCP/IP item.
4
If there is no TCP/IP, click the 'Add' button, select 'TCP/IP' among
Note:
the list of protocols and click 'OK'.
In the 'Microsoft TCP/IP Properties', click the 'IP Address' tab.
5
Select 'Specify an IP address'.
6
Set the IP Address to '192.0.0.193'.
7
If you need to change the TCP/IP address, please contact your system
Note:
administrator or your local Océ service organization.
Set the 'Subnet mask' to '255.255.255.0':
8
[27] Configure IP address
Click 'OK' and again 'OK'.
9
When the configuration is complete, you may be prompted to insert
Note:
your Windows Operation System CD Rom. If so, follow the instructions. At
the end, reboot the computer as requested.

Configuration of the E-connect printserver

The default TCP/IP address of the E-connect is '192.0.0.192'.
If you need to change this TCP/IP address, please contact your system
Note:
administrator or your local Océ service organization.
E-Connect 57