Clean The Slide Shaft - Oce CS 5090 User Manual

The pinch/drive roller pair that is to the extreme right side of the printer (as you
6
are looking at it from the front) has a drive gear that is visible. As you rotate
the rollers, make sure that there is no debris between the teeth of the gear. If
any debris is present, remove by using a stiff brush if needed. Do not allow the
debris to remain as this can affect your line length accuracy and cause banding
in your prints.
[37] Right pinch roller
Close the cover.
7
Install any media if it was removed
8

Clean the slide shaft

The slide shaft requires cleaning to achieve the highest quality output. If the
slide shaft is not kept clean image quality will deteriorate and will eventually
cause a 'carriage axis failure' to occur.
M
To clean the slide shaft
Lift the cover of the printer.
1
With a lint-free cloth moistened with isopropyl alcohol gently clean the entire
2
slide shaft, both the top and bottom.
To clean the slide shaft area above the service station, press 'Utility Menu',
3
'Access Menu' then 'Access Left' or 'Access Right' to move the carriage out
of the way.
After cleaning the area above the service station, press Access Home to move
4
the carriage assembly back into the service station.
Close the cover.
5
Maintenance and cleaning
! ! ! ! Click for Video
111