Use The Second Feed Roll - Oce CS 5090 User Manual

M M M M
To unload the take-up roll
Press the
1
Remove the roll from the printer.
2
Release the adjustable roll guide.
3
Slide the take-up roll out of the printer.
4

Use the second feed roll

The takeup roll can also be used as a feed roll. If you use the takeup roll as a
feed roll, you cannot use the takeup system. If you want to use the takeup roll
as a feed roll, set the printer to ROLL2 by pressing Setup Menu/Paper Options
Menu/Supply Type/Roll2. Follow the loading instructions in the previous
section using the bottom roll.
[6] Use the second feed roll
Caution:
inward under the bottom roller. This could block the media sensor and
prevent the reed roller from feeding media. Make sure you keep the media
turned outward, away from the media sensor.
Getting started
button to cut the media.
Cut
Left Side View
Media presence
sensor
Feed
Roll2
When using the ROLL2 option, the media has a tendency to curl
Dryer
Media sensors for
feed and take up
21