Refill Ink Cartridges - Oce CS 5090 User Manual

Refill ink cartridges

New Océ cartridges are prefilled with ink. However, if you must re-install a
used or empty cartridge, make sure that the ink level in the cartridge is exactly
20 ml. Any other level (above or below 20 ml) can interfere with the
continuous ink refilling process to the cartridges during printing.
To refill a used cartridge with the correct level of ink, use the syringe and hose
provided. The hose length of the syringe is 40 mm.
This 40 mm length guarantees the correct amount of ink when you insert
Note:
the hose completely into the cartridge.
If you do not know the amount of ink in the cartridge, proceed as follows:
Draw excess ink from the cartridge.
1
Refill the cartridge.
2
M M M M
To fill an empty cartridge
Fill the syringe with 20 ml of ink.
1
Attach the hose to the syringe.
2
Insert the hose into the cartridge.
3
Empty the syringe contents into the cartridge.
4
M M M M
To draw excess ink from a cartridge
Insert the hose of the empty syringe into the cartridge.
1
Draw excess ink from cartridge. The level of remaining ink is now exactly 20
2
ml.
Remove syringe.
3
Handling ink and media 87