Ink; Refill Ink Reservoirs; Use The Dryer - Oce CS 5090 User Manual

Ink

Refill ink reservoirs

Keep the reservoirs (on the left side of the printer) always filled with ink. You
can refill them at any time, even while printing. If a reservoir runs out of ink,
the ink delivery lines will deprime and may make the ink leak, and cause
damage to the ink cartridges and the carriage electronics. When refilling ink
reservoirs, take these precautions:
Have paper towels handy
I
Wear disposable gloves.
I
Open only one reservoir at a time to prevent an ink colour from accidentally
I
contaminating another.
Attention:
to your printer.
M M M M
To fill ink reservoirs
Access the reservoirs on the left side of the printer.
1
Remove the cap from the reservoir you want to fill.
2
Check that the ink colour and type in the bottle and the one in the ink reservoir
3
match.
Pour the ink into the reservoir to approximately 1/2 inch from the top. Do not
4
overfill.
Replace the cap on the reservoir.
5
Repeat steps 2 to 5 for the remaining reservoirs.
6

Use the dryer

To ensure prints are dry for unattended printing, the CS5090 features a new
thermal drying system. The system monitors the ambient temperature and
humidity. From these measures, it adjusts the heat in order to optimize drying
time and ensure image quality.
Handling ink and media
! ! ! ! Click for Video
Use of inks other than those supplied by Océ may cause damage
81