Clean The Encoder Strip - Oce CS 5090 User Manual

Clean the encoder strip

The encoder strip is a very essential part of the printer. If it becomes dirty it can
cause a variety of image quality problems. To ensure great image quality keep
the encoder strip clean.
M
To clean the encoder strip
Lift the cover.
1
Locate the encoder strip. The encoder strip is a thin piece of plastic that is
2
attached to a metal bar. This assembly is located just below the flex trailing
cable support and runs the entire width of the printable area. Use the image to
the right to help locate it.
With a cotton swab moistened in isopropyl alcohol gently clean the top and
3
bottom of the encoder strip. Be sure to clean the entire length of the encoder
strip.
[38] Encoder strip
Attention:
way. Any damage to the encoder strip can cause the printer not to operate
properly.
Canned air can also be used to clean the encoder strip. This method will
Note:
only be effective to remove lint and other dry materials. If ink or any liquid gets
on the encoder strip the cotton swab method will have to be used.
Lower the cover.
4
112 Océ CS 5090 User Manual
! ! ! ! Click for Video
Use extreme care not to bend or damage the encoder strip in any