Materials To Use For Cleaning; Clean The Ink Cartridge Jet Plate - Oce CS 5090 User Manual

Materials to use for cleaning

Isopropyl alcohol (industrial grade)
I
Lint-free soft cloth/paper wipe
I
Dry lint-free cloth
I
Cotton swabs
I
Ultrasonic cleaner (if available)
I
Distilled/Reverse osmosis water (purified water)
I
Canned/compressed air.
I
Océ Cleaner A
I

Clean the ink cartridge jet plate

The ink cartridges may require occasional cleaning when used in low humidity.
If repeated priming does not unclog the head, follow the cleaning procedure
below. In addition, cartridges will wear out after prolonged use. If cleaning the
cartridge does not restore print quality, replace it.
M
To clean the inkjet plate
Press 'Utility Menu', 'Access Menu' then 'Access Left' or 'Access Right' to
1
move the carriage away from the service station.
Lift the appropriate valve cover on the carriage cover assembly and disconnect
2
the septum fitting.
Remove the ink cartridge from the printer by gently pulling the top of the
3
cartridge toward you, then lifting it up out of the carriage.
Press lightly against the jets with a water-moistened, lint-free, non-paper cloth
4
(do not use alcohol). Gently blot any excess ink.
Attention:
appear on the cloth; this is normal in this situation.)
Reinstall the cartridge in the carriage and reconnect the ink supply line.
5
Close the valve cover.
6
Attention:
Press the 'Access Home' button to return the carriage to the service station.
7
Press Exit once.
Maintenance and cleaning
'Blot - do not wipe'. Wiping may damage the jets. (Ink will
Never use alcohol to clean the jet area of the cartridge.
107