Oce CS 5090 User Manual page 184

Prime Cartridge
To prime the cartridge, first remove tape from the cartridge
jet plate area. Holding the cartridge and ink prime at a 30
degree angle as shown, prime the cartridge with 3 one
second bursts spaced 3-5 seconds apart until ink is visible
in the ink line.
Ensure no large ink bubbles are visible in the ink line. The
priming process should take about 30 to 60 seconds for
each cartridge.
Wipe the cartridge jet plate with the Ink Prime suction tip
to wipe away excess ink.
Caution: Keep bottle upright or spills may be encountered
and do not fill above the mark line, the Ink Prime will
not function efficiently when bottle is too full.
Back
Océ CS 5090 User Manual