Select Auto-Wipe; Change Ink Types - Oce CS 5090 User Manual

Select auto-wipe

By default, this options is not activated. When 'on', the printer automatically
wipes the cartridge jet plates periodically during printing. However, you can
de-activate this setting if you are having problems with banding.
Not wiping the cartridge jet plates can cause clogging of the inkjets.
Note:
M M M M
To turn on the wiper
Press 'Setup menu/Ink Option menu/Auto-Wipe'.
1
Choose 'On'.
2
Press 'OK'.
3

Change ink types

When you use a new ink type (i.e. from Océ Standard Colour ink to Océ
Outdoor Colour ink), you must change the reservoirs and the cartridges to
match the new ink type. If you are printing with only two different types of inks
using two sets of ink lines, you can use the colour coded quick connect fittings
to change ink types. However, if you use only one set of ink lines for different
ink types, you must purge and rinse the ink delivery lines with distilled water.
Attention:
precautions:
'Do not' use Océ Standard Colour inks with Outdoor media or vice versa.
I
'Never' mix inks.
I
Use only inks developed for the Océ CS 5090 printers.
I
When changing ink types, you must do the following:
Remove and store ink cartridges
I
Remove and store ink reservoirs
I
Install new ink reservoirs
I
Install new ink cartridges
I
Handling ink and media
For best results when changing inks, keep in mind these
83